Compatible parts for Dentoflex implant

J

[email protected]

New Member
Messages
3
Reaction score
0
Hello folks, I am not a lab technician but have been around the block a few times in my Implant Coordinator role for 32+ years! I can identify and find parts for most implant systems out there but this one has me stumped. We have inherited a case with an implant placed in Bolivia that the patient says is a "dentoflex" internal "universal" hex. I googled dentoflex and really got no where. We need to help the dds remove the crown with the right wrench and then torque test the implant or remove it if it has failed. The crown might have to be redone if the implant is okay. Does anyone out there know what might be compatible with this system?
 
CoolHandLuke

CoolHandLuke

Idiot
Full Member
Messages
9,468
Solutions
1
Reaction score
1,411
https://www.spotimplant.com/en/dental-implants/dentoflex literally the second link

https://issuu.com/dentoflex/docs/catalogo_ingles dentoflex catalog, link 5

https://twitter.com/dentoflex?lang=en maybe send them a tweet

https://business.facebook.com/pg/dentoflexbrasil/about/?ref=page_internal or post on facebook

4VjyF4t9Hqt.png

Call +55 11 2083-4130

uknIbAjicIZ.png

m.me/dentoflexbrasil
x-0yuiNw1AX.png

vKDzW_MdhyP.png

[email protected]

EaDvTjOwxIV.png

http://dentoflex.com.br

i'm not sure what you used, but it wasn't google lol
 
zero_zero

zero_zero

Well-Known Member
Full Member
Messages
5,844
Reaction score
1,397
I'd say is a Zimmer knockoff...
 
J

[email protected]

New Member
Messages
3
Reaction score
0
https://www.spotimplant.com/en/dental-implants/dentoflex literally the second link

https://issuu.com/dentoflex/docs/catalogo_ingles dentoflex catalog, link 5

https://twitter.com/dentoflex?lang=en maybe send them a tweet

https://business.facebook.com/pg/dentoflexbrasil/about/?ref=page_internal or post on facebook

4VjyF4t9Hqt.png

Call +55 11 2083-4130

uknIbAjicIZ.png

m.me/dentoflexbrasil
x-0yuiNw1AX.png

vKDzW_MdhyP.png

[email protected]

EaDvTjOwxIV.png

http://dentoflex.com.br

i'm not sure what you used, but it wasn't google lol
Thanks but I looked on all of these sites. The website itself is under maintenance I guess. And I'm not going to call or email overseas. If they have stateside HQ then I would make the effort. The patient is in pain. So maybe we will be fortunate enough that it has failed and we can start over.
 
CoolHandLuke

CoolHandLuke

Idiot
Full Member
Messages
9,468
Solutions
1
Reaction score
1,411
Thanks but I looked on all of these sites. The website itself is under maintenance I guess. And I'm not going to call or email overseas. If they have stateside HQ then I would make the effort. The patient is in pain. So maybe we will be fortunate enough that it has failed and we can start over.
inability to reach the site or access their content could be your ISP limiting access to international sites. happens all the time.
 
keith goldstein

keith goldstein

Active Member
Full Member
Messages
271
Reaction score
32
if it is a dio implant then they take a 1.25/1.27/0.050 hex driver for abutment screws. If you need abutments we have them for DIO connection as well. www.dess-usa.com or email us at [email protected] and we can help you with this
 
M

massoglia

Member
Full Member
Messages
6
Reaction score
0
I from Chile that is near Brazil, I have not seen this implant here but a lot of brazilian implants are internal hex (zimmer) or coping the neodent cone morse

Hopes it helps
 
M

massoglia

Member
Full Member
Messages
6
Reaction score
0
And I forgot that almost everyone uses 1.2 hex driver
 

Similar threads

Mark Jackson
Replies
18
Views
4K
Mountain Goat
Mountain Goat
Top Bottom