The smallest feature size a Form Labs can print is 140 microns. The X, Y resolution on Form Labs is 140 microns. The Pro 2 75 which is our largest printer, can print feature sizes at 75 microns, and has an X, Y resolution of 75 microns. What do you mean by "deviation pics" ?? If you have questions about the pros and cons of each printer, the Form Labs and the Asiga, you are more than welcome to contact Cory Lambertson here at Whip Mix to discuss. I can PM you his contact info...
Data Form Labs Druckgeschwindigkeit: 1-3 cm/Stunde build speed Schicht****e: 25 Mikrometer bis zu 200 Mikrometer slice thickness Bauraum: 145 x 145 x 175 mm build plate Strukturauflösung: 300 Mikrometer Structure resolution minimum build structure Durchmesser Laserkopf: 140 Mikrometer+ laser focus
deviation pic classical test constructed part controlled against milled or printed part
laser focus size has only a bit to do with surface quality deviation or whatever its a bit like a mill with a 0,14 burr depends on x-y-z steps and thermal versus polymerization shrinkage versus deviation ( every printer in the world a has a deviation ( should - is ) correlation to the object volume)
this is structure resolution and this is just a model not form labs half price but without any deviation pics