Cercon Brain Milling Software

F

fadi

Member
Full Member
Messages
7
Reaction score
0
Dear Friends ,

Iam looking for milling software compatible with Degudent barin Expert ,

is there any one have solution for that please ?

Is there any way to make the machine open system ?

Please advise me

Thanks
Fadi
 
K

KimBen

New Member
Messages
1
Reaction score
0
Hello Fadi
I'm owner too from a cerconbrain millingmachine first generation and I'm looking for solutions tu substitute the degudent blocks because the company don' t produce anymore blocks ...I was in contact with Aidite too but the stop the production after that Degudent denunced them for patents violation, whats very sad is because degudent didn t give any solucion to the problem of furniture ....and this isnt Fair ...because at last you invest a lot of money in a milling machine what at least no serve after 10 years😤😤
But I have a solution for the burs if you are intersted..
I'm from Tenerife Island, Spain
....and you?
 
Z

Zahntechnik

New Member
Messages
2
Reaction score
0
But I have a solution for the burs if you are intersted..
I'm from Tenerife Island, Spain
....and you?
Hello, did you find a solution to overcome the usb keys
 
JMN

JMN

Christian Member
Full Member
Messages
12,146
Reaction score
1,884
At this rate the thread will complete by around 2032.
 
Z

Zahntechnik

New Member
Messages
2
Reaction score
0
At this rate the thread will complete by around 2032.
hi,
its true, unless still there is no solution the discussion will continue
do you have this Machine?

best regards
 
JMN

JMN

Christian Member
Full Member
Messages
12,146
Reaction score
1,884
hi,
its true, unless still there is no solution the discussion will continue
do you have this Machine?

best regards
No, I don't have the machine. Just commenting that the thread was growing by one post a year until my comment.
 
R

Raf

New Member
Messages
2
Reaction score
0
Did you find a solution for the usb stick or the ds-cam software?
There is a solution for use 98mm discs and open the system for different materials. Details in private conversation :cool:
 
R

Raf

New Member
Messages
2
Reaction score
0
There is a special software "ExpertBridge98" allows to insert and mill all available Open 98mm discs in the machine.
In addition to the software, you need adapter rings for 98mm discs that fit perfectly with the original machine arm.
These rings are removable and both 98mm and 105mm discs can be used paralelly.
For this adaptation BrainCam software is needed. In order to take full advantage of the device's capabilities, it is best to use BrainCam Pro, you can then import any project formats and mill full-contour works in very high quality. In order to take full advantage of the device's capabilities, it is best to use BrainCam Pro, you can then import any project formats and mill full-contour restorations in very high quality.
If you are interested in details please send me an email to [email protected]
 

Similar threads

H
Replies
0
Views
133
hmartek
H
M
Replies
7
Views
489
Mike Choi
M
A
Replies
6
Views
342
Cleo
Top Bottom