Ceramco 3 with Argen Milled Metal CoCr

1

12yearsatech

Member
Messages
4
Reaction score
0
Having lots of problems with fractures. I design the framework and my co worker stacks the porcelain. I am just reaching out to the forum to see if anyone has had any luck with that combination of products.
 
L

logitech80

Member
Full Member
Messages
16
Reaction score
0
I had problems with cocr. How do u degas cocr?
 
sndmn2

sndmn2

Well-Known Member
Full Member
Messages
1,025
Reaction score
166
I had trouble with their Platinum+ at first. They suggested my first opaque bake be Bredent's Ceram Bond. I use that as my first opaque bake and all is well. However I know nothing of your frame designs or how you handle anything. So tough to tell.
 
L

logitech80

Member
Full Member
Messages
16
Reaction score
0
Having lots of problems with fractures. I design the framework and my co worker stacks the porcelain. I am just reaching out to the forum to see if anyone has had any luck with that combination of products.
When I degas crco I hold at high temp for 15-20min and sandblast really well than apply opaque
 
D

Davor

New Member
Messages
2
Reaction score
0
Having the same problem with that same combination.
The CTE is compatible, but for some reason the porcelain is not stable on there.
Looking to find a different combo.
Anyone else use Argen CoCr? And what porcelain do you use over that.
Or what other CoCr pucks do you mill?
Thanks
 
sndmn2

sndmn2

Well-Known Member
Full Member
Messages
1,025
Reaction score
166
I use their Platinum + SLM.
 

Similar threads

L
Replies
7
Views
252
tuyere
T
D
Replies
7
Views
456
bigj1972
bigj1972
M
Replies
2
Views
849
tuyere
T
sidesh0wb0b
Replies
6
Views
656
Doris A
Doris A
Top Bottom