BL1

C

Cycles

New Member
Full Member
Messages
11
Reaction score
0
Ok so I got crowns that are BL1 and I don’t think that they are a bright white as I thought to be
 
Doris A

Doris A

Well-Known Member
Full Member
Messages
3,813
Solutions
1
Reaction score
1,033
They're not white enough?!?! Well that's as white as you can get. I'm glad you didn't listen to all of us trying to talk you out of this shade.
You would have been very unhappy, especially when you would have had to have them remade. Now, you've got what you've got. You can't make them whiter.
 
Contraluz

Contraluz

Well-Known Member
Full Member
Messages
1,452
Reaction score
275
Ok so I got crowns that are BL1 and I don’t think that they are a bright white as I thought to be
Well, perception is everything...

I hope you were able to look at them, before they were cemented?
 
C

charles007

Well-Known Member
Full Member
Messages
3,897
Reaction score
453
If using Emax/LD, using wrong ingot and seeing to much translucency which = grey. Same can happen using zirconia if to translucent and or stump shade is dark. Stump shade will effect shades and definitely use uncolored frame with BL1.
 
C

charles007

Well-Known Member
Full Member
Messages
3,897
Reaction score
453
When matching any light and bleached shades the framework shade directly influences the final shade and even more so than regular shades.
 
Contraluz

Contraluz

Well-Known Member
Full Member
Messages
1,452
Reaction score
275
When matching any light and bleached shades the framework shade directly influences the final shade and even more so than regular shades.
In general, I find it challenging to make bleach shades look good. Either it looks too opaque/whitish or it falls into gray, as soon as you try to add some translucency to the incised third.
 

Similar threads

npdynamite
Replies
5
Views
113
npdynamite
npdynamite
J
Replies
4
Views
483
Jack_the_dentureman
Jack_the_dentureman
millennium
Replies
16
Views
287
Car 54
Car 54
Top Bottom