August 1st Meet & Greet

[brayks]

will you guys stream some live feeds for those of us that are drowning in workload? hahaha!
would be awesome to see some live action of the new i500!

Good idea...

 

[brayks]

Looking forward to today's gig.

I'm not sure exactly what to expect so...
I was wondering if I might ask that those attending respond to this post along with the number of peeps that will be accompanying you.

It would help in finalizing plans.

I will set-up a "streamer" (NOT a "steamer" thank you) including using the i500 which everyone will be able to get their hands on.

I set-up a little i500 video tutorial page to give user an idea of what the i500 and Medit Link is about. Its mainly a training aid but some may find it helpful.
Medit Link & i500 instructional videos

Thanks
Steve

 

[TheLabGuy]

Myself +2 (All are Dental folks)

 

[sidesh0wb0b]

Good idea...

please let me know if you stream! i would love to pop in if possible

 

[TheLabGuy]

We are running about 30 mins late...on our way though

 

[charles007]

Steve, Rob, please shoot me a text if you go Live.

 

[brayks]

please let me know if you stream! i would love to pop in if possible

Steve, Rob, please shoot me a text if you go Live.

We are planning on doing a live Facebook feed..
https://www.facebook.com/axsysdental/
Any specific interest that anyone would like covered?

 

[charles007]

Here's a few topics of interest Steve.
Would like to know what margin Cad setting can be used with your VersaMills to save on margin finishing of zirconia and LD.
Bet many DLN members would like to see in real time the scanning and designing of a crown with the Medit scanner/Exocad using the new 2.2 Valletta DB.
With FCZ pricing going down hill what would you say to non inhouse milling as a minimum of monthly units for a break even as a staring point.
I'm always looking for nicer looking zirconia so I would like to see your selections of glazed zirconia if possible.

Most importantly, love to hear live music from your VersaMill Allstar Band !

 

[brayks]

Going live now.
Check our facebook page: https://www.facebook.com/axsysdental/

 

[brayks]

Here's a few topics of interest Steve.
Would like to know what margin Cad setting can be used with your VersaMills to save on margin finishing of zirconia and LD.
Bet many DLN members would like to see in real time the scanning and designing of a crown with the Medit scanner/Exocad using the new 2.2 Valletta DB.
With FCZ pricing going down hill what would you say to non inhouse milling as a minimum of monthly units for a break even as a staring point.
I'm always looking for nicer looking zirconia so I would like to see your selections of glazed zirconia if possible.

Most importantly, love to hear live music from your VersaMill Allstar Band !

Will try to answer and stream to address your interests.
As a starting point to your break even questions. Please check out the link below to our ROI calculator.
With this calculator you can input your own costs and volume data to get the answers. We can then chat about the results and what they mean and address further questions and concerns.
ROI Calculator: https://www.axsysdental.com/documents/Versamill Restorative Dentistry ROI Calculator.pdf

 

[sidesh0wb0b]

We are planning on doing a live Facebook feed..
https://www.facebook.com/axsysdental/
Any specific interest that anyone would like covered?

i500 and T500 haha!

 

[brayks]

Getting set-up for a live feed demonstration that Charles wants to see: T-300 scan a design in exocad.
Be ready in about 45 minutes...

 

[JMN]

Getting set-up for a live feed demonstration that Charles wants to see: T-300 scan a design in exocad.
Be ready in about 45 minutes...

Got my tea and feet on the desk waiting. Thanks for livestreaming this for us losers that had work to do.

 

[CoolHandLuke]

and us losers who didnt really have work but were shackled to the bench anyway.

 

[CatamountRob]

and us losers who didnt really have work but were shackled to the bench anyway.

New girlfriend?

 

[JMN]

New girlfriend?

Ouch.

 

[CoolHandLuke]

same girlfriend, new shackles.

 

[TheLabGuy]

First off...Axsys, Steve and his crew are friggin awesome. Seeing all those machines in one place, under one roof gave me a dental tech' chubby. I even did something crazy, rkm and Luke, this is your guys fault. I bought the i-500...the intra-oral scanner. My reasoning is probably what many of us are struggling with right now. We are digitally setup, we have been doing digital for the last ten years, our Docs though are ten years behind us. So here I go to Axsys, saying to myself, I want to buy the desktop T-500 (which is friggin awesome btw) but it doesnt solve my current problem...Docs that need to go digital and me sitting there in my lab waiting on them. Fk it...I'll buy the i-500 and get these Docs to call me when they are doing their next crown prep and actually do it. Then after they see how accurate, how quick, and simple it is...they will get one. Naturally, point them in Axsys direction to buy it and get a nice finders kick back. This is how these intra-oral scanners should of been rolled out from a selling point in my opinion in the first place. Let the labs market it, they are the end user with what information is being collected. Can't wait to get out there chairside and get my docs all going digital...thank you so much Axsys for being such great hosts. Lastly...if you mill zirconium...you might want call them for a preshaded multilayer zirconium disk (1100MPa)...just sayin'

 

[CoolHandLuke]

my fault? after all the people i've pointed to axsys over the years.... i guess its just nice to hear.

i hope you enjoy it.

 

[sndmn2]

I got there a little late but nice . Ben , Tony, and Al were kind enough to show me the equipment. Thanks . Steve was friendly as usual. Met Rob and his team but didn't really get a chance to talk. I like Robs idea on the scanner. Looking forward to next years get together.