Argen HT Liquids - copings too bright

WENDY

WENDY

Member
Full Member
Messages
91
Reaction score
8
Hello!

I have a problem matching shades with Argen HT liquids.

The copings are coming out a shade brighter (i.e. A1 comes out as A shade in bleach / A2 comes out as A1, etc.)

I let the green state zirconia sit in the liquid for 30 seconds.

Has anybody run into the same problem?

Any advice and suggestions will be greatly appreciated


Thank you for all your help.
 
CoolHandLuke

CoolHandLuke

Idiot
Full Member
Messages
10,073
Solutions
1
Reaction score
1,411
I should think a lot depends also on the zirconia brand, the wall thickness, the dilution, the sintering temp, the drying procedure, what day it is, the alignment of venus, the mood God might be in...
 
WENDY

WENDY

Member
Full Member
Messages
91
Reaction score
8
I should think a lot depends also on the zirconia brand, the wall thickness, the dilution, the sintering temp, the drying procedure, what day it is, the alignment of venus, the mood God might be in...
Oh boy 😂
 
erics24k

erics24k

Member
Full Member
Messages
50
Reaction score
6
Hello!

I have a problem matching shades with Argen HT liquids.

The copings are coming out a shade brighter (i.e. A1 comes out as A shade in bleach / A2 comes out as A1, etc.)

I let the green state zirconia sit in the liquid for 30 seconds.

Has anybody run into the same problem?

Any advice and suggestions will be greatly appreciated


Thank you for all your help.
Are you using ArgenZ Zirconia as well? If so, you may want to give your rep a call (you probably have :), but we will do our best to help. I would expect the shade to be slightly light but not to the point of a full shade.
 
WENDY

WENDY

Member
Full Member
Messages
91
Reaction score
8
Are you using ArgenZ Zirconia as well? If so, you may want to give your rep a call (you probably have :), but we will do our best to help. I would expect the shade to be slightly light but not to the point of a full shade.
Hi! They recommended ST liquids for darker shades (more absorption).
But I tried 60 sec HT liquid and it came out a bit darker than when I do 30 sec, so we are doing that for now.
Thank you for checking in!
 

Similar threads

U
Replies
10
Views
2K
Car 54
Car 54
M
Replies
3
Views
1K
Car 54
Car 54
GoldRunner
Replies
24
Views
4K
Brett Hansen CDT
Brett Hansen CDT
Top Bottom