A problem about Asiga

R

redog

New Member
Messages
1
Reaction score
0
The building platform of my machine can not reach to the bottom normally, so that the UV light won't open. Does anyone can solve the problem or have the method to turn off the pressure receptor.
Any information would be appreciated.
Thanks.
 
Brett Hansen CDT

Brett Hansen CDT

Well-Known Member
Full Member
Messages
1,679
Reaction score
102
What error are you seeing when the build plate doesn't reach the bottom? I've seen this happen if there are pieces of previous builds that are still in your resin tray. The resin needs to be filtered if that is the case.
 
Top Bottom