3Shape Libraries into ExoCad Libraries

C

cosmicsport

Member
Full Member
Messages
42
Reaction score
0
Hello, I recently switched to Exocad. I created over 20 design libraries in 3Shape and would like to use those in ExoCad.
Does anybody know how to convert 3Shape to Exocad libraries??

Any help is useful !!

Thank you

Cosmicsport
 
2thm8kr

2thm8kr

Beanosavedmysociallife
Full Member
Messages
11,304
Reaction score
2,510
Save individual stl files of the teeth and use exocad model editor to make libraries for exocad. You only need half of each arch, but I forget if right or left side.
Get extra beer and order 🍕, you have several days of work ahead of you.
 
Sevan P

Sevan P

Well-Known Member
Full Member
Messages
3,413
Reaction score
641
Easy to convert dcm to stl then manually set them up in exocad.
 
cadfan

cadfan

Well-Known Member
Full Member
Messages
1,519
Reaction score
207
If open dcm format load them as add mesh export as off load in model editor mark areas save done
 
C

cosmicsport

Member
Full Member
Messages
42
Reaction score
0
Save individual stl files of the teeth and use exocad model editor to make libraries for exocad. You only need half of each arch, but I forget if right or left side.
Get extra beer and order 🍕, you have several days of work ahead of you.

I am getting a lot of Errros. Anything I am doing wrong?
2020-01-30 11_40_44-Window.jpg 2020-01-30 11_41_00-Window.jpg 2020-01-30 11_41_04-Window.jpg
 
sidesh0wb0b

sidesh0wb0b

Well-Known Member
Donator
Full Member
Messages
5,649
Reaction score
649
Sure for a small fee, how many files you have?
honestly i dont know haha. would have to actually open 3shape again and see whats on there
 
C

cosmicsport

Member
Full Member
Messages
42
Reaction score
0
Here is how I did it.
I loaded the STL, edit mesh, cut the basal area to create a hollowed-out Mesh, export as STL. I can load that as a teeth Library. 2020-01-30 15_56_16-Window.jpg
 
2thm8kr

2thm8kr

Beanosavedmysociallife
Full Member
Messages
11,304
Reaction score
2,510
Here is how I did it.
I loaded the STL, edit mesh, cut the basal area to create a hollowed-out Mesh, export as STL. I can load that as a teeth Library. View attachment 34783
When you import the stl files into Model Editor does it still give the error message or it works?
 
C

cosmicsport

Member
Full Member
Messages
42
Reaction score
0
It works now.
The Model Editor is a pain.
 
2thm8kr

2thm8kr

Beanosavedmysociallife
Full Member
Messages
11,304
Reaction score
2,510
It works now.
The Model Editor is a pain.
Pizza and beer, then more beer. You have a lot of work to complete those tooth libraries. My first one took me several days Once you learn that software it's a lot quicker.
 
Top Bottom