kyleyounggun
Member
Full Member
- Messages
- 28
- Reaction score
- 0
I've been requested to make a dual splint on both arches. Both arches flat plane with a point or box on the bottom to relax the muscles in the mouth to offer more comfort...
I am curious if theres a way to duplicate a design on one arch and reuse the a splint in the design to make the other arch.
Currently, I've been creating a splint on one arch and setting keeping the values on the articulator and thicknesses and then creating the splint on the opposing arch with the same thickness and bite openings to maintain the distance best as possible. After I've milled or printed the splints I usually have to check to make sure the splints are not making contact except for the area I've added my guide point on the lower.
Is there an easier way to do dual arches in 3shape?
Thanks
I am curious if theres a way to duplicate a design on one arch and reuse the a splint in the design to make the other arch.
Currently, I've been creating a splint on one arch and setting keeping the values on the articulator and thicknesses and then creating the splint on the opposing arch with the same thickness and bite openings to maintain the distance best as possible. After I've milled or printed the splints I usually have to check to make sure the splints are not making contact except for the area I've added my guide point on the lower.
Is there an easier way to do dual arches in 3shape?
Thanks