20% OFF Pre-Shaded Alien 98mm Zirconia Blocks

AlienMilling

AlienMilling

Active Member
Full Member

Now Available
20% Off Alien Zirconia


Alien 98mm Zirconia Blocks are made in the USA!

Now you can mill Alien Zirconia in your lab. Experience the highest quality and translucency the Zirconia world has to offer. Over 50,000 satisfied patients, doctors, and labs.

Available in...
White Zirconia 98mm Puck MSRP

  • 98 mm x 12 mm Reg. $138 - Now $110
  • 98 mm x 16 mm Reg. $174 - Now $139
  • 98 mm x 20 mm Reg. $212 - Now $169
Pre-Shaded Zirconia 98mm Puck MSRP (A1-D4)

  • 98 mm x 12 mm Reg. $160 - Now $128
  • 98 mm x 16 mm Reg. $208 - Now $166
  • 98 mm x 20 mm Reg. $250 - Now $200
Compatibility
98mm with a 10mm step. Compatible with Weiland, VHF, Roland, and most open CAD CAM Milling Machines.

Isostatic Pressing
Each Zirconia Blank is isostaically pressed for consistent results every time. We do not cut corners, as we use the exact same zirconia for our milling services.

Gentle on your Mill
Alien Zirconia Disks are softer in the green state, than generic zirconia. This extends the life of your spindle, and tools.

Translucency Factor
High Translucency has become a loosely used term to define the product, rather than the characteristics. The real definition lies in Translucency Parameters (TP),and Contrast Ratio (CR). The Contrast Ratio for Alien Zirconia Blanks are >34:1 CR %, one of the highest translucent zirconia offered in the industry.

Research
We research, and use 98 mm Alien Zirconia Blanks in our milling center everyday. We know our zirconia is out of this world. Many labs, doctors, and patients may be unaware Zirconia is a radioactive material. Safety is the main focus of the company, and we would not use unsafe materials exposing our technicians to unsafe materials.

Our Research and Development engineers continually test the zirconia powder for any traces of radioactivity, and makes sure the zirconia is 100% safe every time.

Studies have found offshore zirconia may contain unsafe levels of radioactivity.

Alien Solid Zirconia is made in the USA
 
Last edited:
OP
AlienMilling

AlienMilling

Active Member
Full Member
ends July 31
 
Last edited:
OP
AlienMilling

AlienMilling

Active Member
Full Member
On Now Til July 31
 
Guest Room
Help Users
  • No one is chatting at the moment.
    There are no messages in the chat. Be the first one to say Hi!
    Top Bottom