Search results

  1. Z

    Extra-soft gingiva resin?

    HeyGears is notoriously hard to contact. When I was shopping for a 3d printer, I left messages, sent emails, even texted the person who was supposed to be my rep. Ended up buying elsewhere.
  2. Z

    Computer setup for Exocad software and Medit T510 scanner

    I use the business version of Microsoft Onedrive. It can be configured to be HIPPA compliant. I use it so I can design on two stations and to backup offsite. It's $12.50 per month and includes the Office 365
  3. Z

    3D Printed Implant Model Work Discrepancies

    I assume you have ran a resin calibration on your printer. I would outsource a model to a place that has a carbon printer and get a model for comparison to one of the models above. Then go from there. I use Argen when I run into any fit problem so I can confirm accuracy of the printer first.
  4. Z

    Help with Exocad Model Creator

    First thing I would do is check in the Library for your model creator and see what SDFA file is associated with the implant you are trying to use. If that is correct then I would call the analog/implant manufacturer and see if they can help. DESS had a problem with there Nobel RS WP file and...
  5. Z

    propane and oxygen ratio

    All of the Jensen High Noble alloys are 20psi O2 and 10 psi propane. Light with gas trim with O2
  6. Z

    Has anyone experienced something like this?

    What made it worse was that I only put them in the oven to add the halo on the incisal edge, they had already been tried in and the patient, a local socialite, loved them. This was also in the days before I had digital.
  7. Z

    Has anyone experienced something like this?

    Did that to 5-12 Emax singles with patient in the chair. Prettiest opalescent balls that you would ever want not to see.
  8. Z

    Looking for Lab Looking for someone to print models for my lab

    If the scans are from Itero, their models are decent for proximal contacts and would need minimal effort on your part, though you may have to pay a signup fee for Itero (not sure how they do it now) and the per model charge. All the other scans you would either need a printer or outsource. I...
  9. Z

    Ivoclar S2 purchase price

    Zubler has really nice sintering furnaces as well that are as well made as the Ivoclar ones and were about 2k less in price.
  10. Z

    Miyo overfire

    I don't know the specifics of MiYo but with most of the ceramic materials, firing at higher temps can cause changes in the structure of the material and most of what we do depends on specific crystalline structures. Some materials it doesn't matter, but some materials it can have catastrophic...
  11. Z

    Ivoclar vs zubler

    I have used both for emax and the Zubler for zirconia, both are really good ovens and have their strong points. Points to the Ivoclar oven for the clamshell design, it would have saved me 2 remakes that fell off the tray in my Zubler over the 17 years or so that I have had it. They each fire...
  12. Z

    Hassbio Amber Press Large Ingots - Need Plunger

    Length shouldn't matter. All ovens that I know, accommodate longer ingots with same plunger. It may be a larger diameter.
  13. Z

    Ceramill airstream help

    Call Garland, they are helpful when it comes to things like that.
  14. Z

    EnvisionOne printing issues

    I get that when the resin isn't thoroughly mixed. I would filter the resin and clean the vat (tray). Then mix the resin with your resin mixer or, I mix by shaking the bottle for a couple of minutes.
  15. Z

    Ceramill Motion 2 Issues

    Garland Dental Services also is an authorized repair. They will call you back and possibly diagnose. I have to ask, did you turn off and restart the machine. This will tell you if you need a service call. If it errors again on initial startup, the B axis motor and encoder will likely need...
  16. Z

    Exocad Freeforming Tool Settings

    Amazing what is hidden under the hood of Exocad.
  17. Z

    Katana YML line

    I used the YML for a while and could eliminate the demarcation by orientation of the incisal area to have it extend further down the facial and get thicker in the incisal area. I have now switched to a much better product and don't have to do that. Amann Girrbach Bion is a single strength...
  18. Z

    Cement for ti-base to zirconia?

    When I started using ti-bases, I had a similar question and didn't find answers that I was looking for. I did the next best thing. I milled six different abutments and cemented them to ti-bases. Two by applying cement to both. Two applying cement to ti-base only. Two applying cement to crown...
  19. Z

    For all the mill owners - Was it worth it ?

    I bought my mill with zero zirconia capability or experience. I didn't offer it as a product in my lab, I was strictly wax/cast/ stack crown and bridge. My ROI was less than 3 yrs. Only regrets is that I didn't do it earlier.
  20. Z

    Help Wanted ⭐DENTIST OPPORTUNITY: Master of Implants & Arch Surgery - California⭐

    More than you may expect are lurking and some participate in the conversations with interest in learning and improving their interaction with the laboratory. They also add to the conversation and have had a positive impact on a wide array of topics.
Top Bottom