In CNC machining terminology what is meant by angular velocities is the actual spindle speed (measured in rpm) and feed rates are the plunge or travel of each axis (measured in ipm).
As long as your feed rate and velocities are normal it shouldn't be a concern breaking a tool. I've ran the remote software at 140% processing speed in the past without issue.
Depending on your version of the remote software, you may need to enable a toolbar under the 'view' menu
Version 1.42 it should be readily accessible
Version 1.46 you will need to open the administrative remote tool, it requires a password to access.
Please see the attached screenshots.
Good...
Had this exact situation happen to me once! You need to enable "online-toolpath-calculation" in your cnc remote software. For me, The button got switched off by accident, probably from an accidental mouse click. Essentially, what this does is it enables a real-time "buffer" that reads and stores...
I'd recommend Core3d if you're looking for a change. Two locations, one in Vegas to serve the west coast and one in Detroit to serve the east coast. On top of that, they've been really hitting it hard this year with trying to promote themselves! It's really refreshing compared to all the doom...
LITERALLY had this happen to me last week for the first time on a printed diagnostic case!!
It's because the incisal pin opening articulator value was changed during the design. What you need to do is close the incisal pin settings AND THEN go to the first tab and LOCK the new position.
I...
I've always found the UTML (especially the enamel shades) to come out a bit more grey. STML shades typically come out just a bit darker than what I like, so we've resorted to choosing a shade lighter or going with the incisal portion of a shade.
For example: if the shade is A3, we will mill it...
Too many variables here to simply have it blamed on the update.
Are you scanning a solid model or sectioned/pinned model
Were the dies fully seated on the initial scan?
Are there artefacts/other issues within the design itself... I've had something as simple as a Pontic protruding through a...
It's a real shame to see a company like 3shape go in the direction that they have in recent years. Back in 2006, it was very refreshing to see an 'open system' from a company in the dental lab industry. A very stark contrast compared to closed and proprietary systems like Procera, Cercon, or...
Haven't had issues myself, but have you checked your material parameters? They may have been overwritten with the update, specifically the cement gap and extra cement gap values.
Also, 2018 has been released. Who is your reseller?
I have been using Autodesk Meshmixer, it doesn't require Model Builder and it's free. Been wanting to do a tutorial video for a while once I feel confident that I've got the process down pat.
Sorry for reviving an old thread, but I was directing a friend here to download the file since they couldn't find it on AG's site and it appears that the CAP link is dead.
I've uploaded a copy to my website as well as a shared google drive folder. Link is here for the F-Code Conversion Tool...
I can only comment on the 350i:
However, the makers of the 5x-400 and Motion 2 happen to be sponsors on this site. (so if @brayks or @Amann Girrbach sees my message and want to send me a machine for review purposes, please do ;))