Search results

  1. Getoothachopper

    How to Calibrate An AG motion 2 DNA ?

    Anyone done this ? I'm hearing it has to be done through AG themselves & I'm having a hard time getting them to return a call ,,,,,,,,,,, I guess it could just be the holidays ,but this is the third day iv'e been leaving messages now . :(
  2. Getoothachopper

    Changing the spindle on a Zenotec Mini

    Been running the mill for 5+ yrs now and am starting to notice a few small problems I think are spindle-related. Anyway, it's about time I changed it . I've seen a place in LA where they rebuild including the sensors . Switching the part out looks pretty straightforward. I have seen people...
  3. Getoothachopper

    Question on Glazing Zirconium.

    Coming from a traditional background of porc fused to metal ,I have ideas of heating & cooling zirc which are probably wrong . So my question ,,,,,,when glazing monolithic zirc (singles) in the 750/850c range. Do you need to slow cool or is it okay to have the muffle drop open once the glaze...
  4. Getoothachopper

    AG Ceramill motion 2 DNA ,questions.

    I have a x5 mikro,DNA and have been very happy with it (once I figured out I needed to use higher quality diamond coated burs) . I have both the motion & match 2 software and am thinking of buying a used DNA motion 2 ,,,,,,,,,,,,,,So I have two questions. Can I use the same software and computer...
  5. Getoothachopper

    "Looking for a good place that work on lab handpieces."

    I've got a couple here (microstar & marathon 5000) both still work okay but I would like them refurbished ,( chuck & bearings & cleaning) . I did a search here and only found garland and the link no longer worked . Anyone know of a reputable place to send them ? thanks in advance .
  6. Getoothachopper

    Looking for a good millable 98mm night guard material.

    Iv'e never bothered with these before, but my wife needs a new acrylic (hard) nightguard . I'm sure there is a millable material which is equivalent ,,,,,,what do you guys like to use , many thanks in advance for any replies .
  7. Getoothachopper

    AG Ceramill therm S sintering furnace ,,,software problem.

    I bought the furnace through CAP a few years ago and I know they got sold to Zahn. Who should I contact for tech help ?
  8. Getoothachopper

    Oil Compressor okay for dental mills ?

    My lab is small and I have to share the room with my compressor .So when i'm milling I have to wear headphones. (I generally mill less than two hours a day) I have a couple of jun-Air double head compressors that are sient that I would love to be able to use for milling . I can work around the...
  9. Getoothachopper

    Installing a new copy of Exocad ?

    My computer (windows 10) did something weird today and all my programs have gone . Iv'e tried recovery and a bunch of other things but nothing . So i'm going to format the lot and reinstall windows. So my question is where do I go to get a fresh copy of Exocad ,2016 I think (with the automatic...
  10. Getoothachopper

    Ivoclar Programat P500 'Dim screen' problem ?

    It has got to the point where I can barely read the screen . How easy is it to replace the panel . I'm guessing I could get the part from Ivoclar. The contrast button makes no difference . Anyone replaced one of these panels,would love to know your experiences,,,,,,,,,,,Thank you for any replies .
  11. Getoothachopper

    Anyone have good shade accuracy experiences with ArgenZst or Nexx ZR multi ?

    Wanting to try these two and looking for information . Will be doing single units and 'spot on shades' is what i'm after :) thanks in advance for any replies .
  12. Getoothachopper

    'Hats off to Ivoclar support'

    I just wanted to say how impressed I was with the Tech support. My Wieland Zenotec mini which has performed flawlessly for the past four years had a software problem the other day , essentially locking the machine up. I put off calling them for a few days as I was expecting the run around...
  13. Getoothachopper

    Looking for a Thermo couple for an AG Ceramill therm 2 sintering furnace ?

    Iv'e tried Zahn ,but it takes 6 to 8 weeks . Any smaller companies that might have it in stock ? I wouldn't be upset if it was a little cheaper either :) ($600 ish),,,,, Many thanks in advance for any replies.
  14. Getoothachopper

    "How much quicker with two Scanners ?" (I did a test)

    So iv'e been running a second scanner now for about a year. I'm a single man lab doing about Six pans of work a day (some days ten, some four) Yesterday I wondered how much faster I was scanning with both simultaneously ?. Four boxes of single units, including entering all the info and sticky...
  15. Getoothachopper

    What Brand of spray glaze do you use for Zirc ?

    I've always used InSync paste and the last six months been using a lot of the InSync universal spray glaze (took me a long time to get it dialed into where I really like the results) Anyway when I called Jensen for a couple of the large bottles they told me they were out and didn't know when...
  16. Getoothachopper

    What is the strongest method for bonding Zirc in the mouth ?

    Had a Doc call me . He has a case where the preps were very small / short with fairly long teeth . He has used Fuji Cem to bond in the mouth . But a year later they are coming off . Anyone have any ideas of a good material to really glue these suckers in ? ,,,,,,,,,, many thanks in advance for...
  17. Getoothachopper

    'Wieland Zenotec Update'...,worth doing ?

    Iv'e just had a 'new update available' window show up today in my milling software (Jan 31,2018) Anyone done the update ? Thanks for info in advance .
  18. Getoothachopper

    AG's Ceramill therm II ghetto makeover :)

    After getting my new sexy 'therm S' ,my old furnace was looking really dated . So a can of high temp paint & a bar handle off Ebay (total cost $15) I have matching furnaces. :D
  19. Getoothachopper

    'Culp digital tooth libraries'

    Anyone on here used these ,what are your opinions ?. A few things peaked my interest ,the flatter triangular ridges,broad interproximal contacts and more natural fossa depth . All of these things I have to adjust with my current Libraries ( Exo,ZirkonZahn,& Knut miller ). Any idea the cost and...
Top Bottom