D
Davesgone
Active Member
Full Member
- Messages
- 104
- Reaction score
- 3
Anyone know anything about SnowRocks flexible RPD materials?
Was thinking the same thing.I hope @AJEL is is ok, we haven't seen him here in a long time.
Spoke with him about 8-10 weeks ago. He's fine, just busy.I hope @AJEL is ok, we haven't seen him here in a long time.
Bless you. I always worry when people disappear.Spoke with him about 8-10 weeks ago. He's fine, just busy.
Ajel got me doing snowrock. It's a great flexible, but we don't offer any warranty like we do with tcs,frs, or visiclear. I will say it's a great flexible if the patient is going to most likely lose some teeth in the near future. Reason being, you can use regular cold cure acrylic to it and it polishes just like acrylic as well. Downside, it's not nearly as strong as valplast, tcs, or visi. But easily repairable. Hope that helps.
As long as you get the temperatures, hold times and pressures correct.Can Snow rock acrylic be injected with a non snow rock press such as the Myerson FlexPress?
i tried with my flexpress. it wasn't repeatable for me especially on larger partials. it just wasn't powerful enough to inject completely. i ended up buying the injector and have had no problems. besides with their machine i can inject three cases in under two minutes. you can preheat up to six cartridges simultaneously. if you want to try with your flexpress they'll send you plenty of samplesCan Snow rock acrylic be injected with a non snow rock press such as the Myerson FlexPress?
yes it can. before we got the snowrock system another lab was processing for us, and they have a flexpressCan Snow rock acrylic be injected with a non snow rock press such as the Myerson FlexPress?