Panavia V5

N

Nimble

Member
Full Member
Messages
15
Reaction score
1
Hello,
I need to cement PFM crown over Titanium custom Abutment ( Scerw-mentable).
I have Panavia V5 and I hear that this can be use to cement them.
I am here to ask anyone who knows how to and teach me step by step?
Thanks very much!
 
A

adl

Active Member
Full Member
Messages
454
Reaction score
66
Sandblast both the crown and abutment, steam clean and dry really well . Apply the white primer on both , abut and crown and use an air hose to dry really well . Apply the metal primer ( blue cap) on the titanium abutment and let it sit for 20 seconds . Air dry well . Apply the cement , light cure for 20 seconds and then don’t touch it for 5 minutes.
 
N

Nimble

Member
Full Member
Messages
15
Reaction score
1
Thank you very much!
Sandblast both the crown and abutment, steam clean and dry really well . Apply the white primer on both , abut and crown and use an air hose to dry really well . Apply the metal primer ( blue cap) on the titanium abutment and let it sit for 20 seconds . Air dry well . Apply the cement , light cure for 20 seconds and then don’t touch it for 5 minutes.
Thank you very much!
 
Last edited:

Similar threads

Top Bottom