SARGON implant components.m

P

Pandy

Member
Full Member
Messages
8
Reaction score
1
Hello everyone! I am troubled with Sargon implant components. I need to make a new crown on Sargon external ( it’s called “Legend”) however, it’s discontinued system. I have contacted both BioDent (manufacturing) and Dr. Sargon Lazarof (who invented Sargon implant ) but not luck.
I would appreciate any informations.
Please let me know if anyone know any doctor or lab still may have Sargon implant components.
I need impression coping, analog, abutment ( for UCLA) and screws .

Thank you very much.!
 
user name

user name

Well-Known Member
Full Member
Messages
6,960
Reaction score
1,633

These are just locators, but its a start.

 
P

Pandy

Member
Full Member
Messages
8
Reaction score
1
Thank you for information but I already have called Preat and they said they don’t have what I am looking for ....
I also contacted Sargon Implant Institute and answer was Negative 😞
 
CoolHandLuke

CoolHandLuke

Idiot
Full Member
Messages
10,078
Solutions
1
Reaction score
1,411
if you can't get the components from the source, you may have to decline doing the case or deal with compatible components instead.
 
CoolHandLuke

CoolHandLuke

Idiot
Full Member
Messages
10,078
Solutions
1
Reaction score
1,411
https://caselaw.findlaw.com/ca-supreme-court/1616426.html i think i see the problem.

not sure, but i think the system you are dealing with *DOES NOT HAVE* any lab components because the system did not account for crown failure.

if you are making a new crown for a Sargon implant, you will not find any components because none were ever made.
 
Jo Chen

Jo Chen

Well-Known Member
Full Member
Messages
537
Reaction score
105
Titanimplants.com maybe
 
P

Pandy

Member
Full Member
Messages
8
Reaction score
1
DESS-USA

DESS-USA

Active Member
Full Member
Messages
222
Reaction score
63
the screw is a M2.0 and the hex is 4.1mmD with 1.25 height. what about using a branemark RP has a 4.1mmD with a M2.0 screw and the hex is 0.7 so a bit shorter...
if you can't find the parts then you may not have any other options

External Hex measurements.png
 

Attachments

  • Branemark External Hex Compatible Components - DESS USA 2019-2.pdf
    1.8 MB · Views: 7
P

Pandy

Member
Full Member
Messages
8
Reaction score
1
Thank you very much! This is very helpful!
 
CoolHandLuke

CoolHandLuke

Idiot
Full Member
Messages
10,078
Solutions
1
Reaction score
1,411
Well Branemark implants were named in the lawsuit. Doesnt make a whole lot of sense that sargon would copy the interface though.
 
lcmlabforum

lcmlabforum

Well-Known Member
Full Member
Messages
1,476
Reaction score
160
BTW - you might want to look up Dr. Winston Chee in California - he might have some remaining parts.
Good luck
LCM
 
N

Nimble

Member
Full Member
Messages
15
Reaction score
1
Hello LCM,
Really appreciate for your information!
I actually found impression coping but don’t have analog so I will contact. Dr. Chee.

Thank you very much!
 
Top Bottom