• Welcome to Dental Lab Network
    1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

    3D Printer

    Discussion in 'Dental Lab Network Faq & Registration Help' started by oscar102624, Sep 12, 2017.

    1. oscar102624

      oscar102624 New Member Full Member

      Joined:
      May 2015
      Messages:
      19
      Likes Received:
      2
      Does anyone know or have a good 3D printer that's good for production to print an average of 8 models a day.


      Sent from my iPhone using Tapatalk
       
    2. JMN
      Curious

      JMN Christian Member Full Member

      Joined:
      Sep 2012
      Messages:
      5,839
      Likes Received:
      1,202
      Location:
      In a surprisingly solid sea of electrons
      Looking to replace or augment the Form 2?
       
    3. CoolHandLuke
      Fiendish

      CoolHandLuke Well-Known Member Full Member

      Joined:
      Aug 2011
      Messages:
      6,559
      Likes Received:
      1,080
      you willing to spend a few hundred grand?

      if not, bye.

      if so, Objet Connex series. alternatively 3dsystems MJP series (avoid service through 3rd party)
       
    4. Matt Drury
      Thinking

      Matt Drury Active Member Full Member

      Joined:
      Jul 2016
      Messages:
      184
      Likes Received:
      88
      Location:
      Louisville, KY
      The Asiga Pro 2 or MAX could easily print 8 full arch models or more models in 8 hours or less... The attached picture of stacked models took about 4-4.5 hours to print... if you removed the bottom layers and only printed the 4 full arch models on the top layer from the picture, your looking at 2.5 - 3 hours tops to print those 4 full arch models vertically. Asiga Pro 2 has the largest build plate and z axis (verticle axis of 200mm) The Max has a slightly smaller build plate and a Z axis of 75mm. Pro 2 is $24,990 and the Max is 13,990
       

      Attached Files:

    5. JMN
      Curious

      JMN Christian Member Full Member

      Joined:
      Sep 2012
      Messages:
      5,839
      Likes Received:
      1,202
      Location:
      In a surprisingly solid sea of electrons
      did you mean

       
    6. oscar102624

      oscar102624 New Member Full Member

      Joined:
      May 2015
      Messages:
      19
      Likes Received:
      2
      I'm definitely interested in the Pro 2


      Sent from my iPhone using Tapatalk
       
    7. Matt Drury
      Thinking

      Matt Drury Active Member Full Member

      Joined:
      Jul 2016
      Messages:
      184
      Likes Received:
      88
      Location:
      Louisville, KY
      4/8 models... I meant 4 FULL (upper and lower) arch models, or 8 models if your only printing either an upper OR lower...
       
    8. JMN
      Curious

      JMN Christian Member Full Member

      Joined:
      Sep 2012
      Messages:
      5,839
      Likes Received:
      1,202
      Location:
      In a surprisingly solid sea of electrons
      ahhhaaaaaaaaaa. I'll slink away now.
       
      • Like Like x 1
    9. Bryce Hiller
      Daring

      Bryce Hiller Active Member Full Member

      Joined:
      Feb 2017
      Messages:
      142
      Likes Received:
      28
      Location:
      Ohio
      We have an Asiga Max. Can't possibly recommend it enough. EXCELLENT printer.
       
      • Winner Winner x 1
      • Informative Informative x 1
    10. Joshua R. Baldwin
      Amazed

      Joshua R. Baldwin New Member Full Member

      Joined:
      Oct 2017
      Messages:
      7
      Likes Received:
      5
      Location:
      Sarasota, Florida
      I agree
      I agree. The Pro 2 is a great printer. I couldn't be happier with mine.
       
      • Informative Informative x 1

    Share This Page