Wieland zenotec mini issues

  • Thread starter dr.dhaval thakkar
  • Start date
D

dr.dhaval thakkar

Member
Full Member
Messages
55
Reaction score
0
Hello there.

I have wieland zenotec mini which had some issues with blank holder rotation few months back.

So i changed the A-axis cable. And problem got solved.

Again similar kind of problem is started.
Blank holder is not getting back in Basic position and it shows emergency stop error.

What could be the solution??

Please help out ASAP!!

Thank you!


Sent from my iPhone using Tapatalk
 
Sevan P

Sevan P

Well-Known Member
Full Member
Messages
3,413
Reaction score
641
Main board is going out or is gone out. When stuff like this happens usually cant be fixed asap.

Only suggestion is to take the cover off, get some contact cleaner. Take the main board off and spray the piss out of it, also spray all other boards blow with air and let dry and put back together.

This might or might not be out of you skill level but I do a cleaning once every 4 to 5 months.
 
Toothman19

Toothman19

Active Member
Full Member
Messages
689
Reaction score
77
Its probably one of the switches. Have you tried calling Wieland?
 

Similar threads

Getoothachopper
Replies
10
Views
3K
Getoothachopper
Getoothachopper
Top Bottom