• Welcome to Dental Lab Network
    1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

    Whoops. Ingot help?

    Discussion in 'All Porcelain-Press' started by user name, Aug 7, 2017.

    1. user name
      Question

      user name Well-Known Member Donator Full Member

      Joined:
      May 2010
      Messages:
      4,305
      Likes Received:
      1,095
      Im doing an e.max molar, 2R1.5.

      My dumb conversion chart suggested C-1, so I did...way too gray. Im thinking A-1, then tone it down with a bit of 'C' stain. Any thoughts in the next 20 minutes? o_O
       
    2. Contraluz

      Contraluz Active Member Full Member

      Joined:
      Mar 2011
      Messages:
      248
      Likes Received:
      96
      Agree...
       
      • Like Like x 1
      • Winner Winner x 1
    3. user name
      Question

      user name Well-Known Member Donator Full Member

      Joined:
      May 2010
      Messages:
      4,305
      Likes Received:
      1,095
      Thank you.
       
      • Like Like x 2
    4. Contraluz

      Contraluz Active Member Full Member

      Joined:
      Mar 2011
      Messages:
      248
      Likes Received:
      96
      2r1.5 is a bit lower in value. You may want to press it in HT, if you use e.max. As we all know :oops:, Ht ingots are rather low in value...

      Just a thought.
       
      • Like Like x 1
    5. ps2thtec
      Question

      ps2thtec Well-Known Member Donator Full Member

      Joined:
      Mar 2011
      Messages:
      1,077
      Likes Received:
      366
      Location:
      BIG 10 Country
      My notes I make on mine say A1(LT) Stain with the Grey/Brown from the Artistain kit, and then some pink, I2 and blue
      To finish off. Good luck!
       
      • Like Like x 1
    6. RileyS
      Inspired

      RileyS Well-Known Member Full Member

      Joined:
      Mar 2011
      Messages:
      2,118
      Likes Received:
      447
      MT A1 is what I do
       
      • Like Like x 1
    7. sidesh0wb0b
      Sleepy

      sidesh0wb0b Well-Known Member Full Member

      Joined:
      May 2012
      Messages:
      3,117
      Likes Received:
      456
      Location:
      Northeastern Tennessee
      HTA1 is where i press it.
      ive used MTA1 as well
       
      • Like Like x 2

    Share This Page