Testing Ti single abutments with the newest version of hyperDENT

[greeny]

Hey guys, just thought I'd share some of the initial tests we've done with hyperDENT 2012 in-house. We've tackled all the Zimmer and Nobel Replace platforms and will have Astra and 3i done within the next week or so. The .stl data we used was a couple of generic abutments with no interface geometry (it was added in the CAM) so that's why some of them are sized/designed a little weird. We were just testing the fits. Sorry, no videos yet and we STILL don't have a macro lens here that can get good pics of these small parts. Maybe Santa will bring us something soon...

 

[greeny]

more positive results - this time cutting an astra abutment:

 

[k2 Ceramic Studio]

Wow greeny they look fantastic. I really want to get Hyperdent and now even more after seeing those. If you dont mind what was the cost of it. Got some really cool goodies stored in Dropbox if you want them then PM me your email You are going to really think Santa has come when you see them
All the best Pete
It's the least I can do for an other lab from Manchester Lol

 

[Drizzt]

Alpha Bio compatible


Biocom 3i compatible


Friadent Xive compatible


Straumann Bone Level compatible


Nobel Replace compatible

Also Astra is on the way , plus all companies that copy the companies above . All milled inhouse with Mayka Dental Cam and Yenadent D 40 .

 

[PinAn]

i think the hardest part is strumann system , dose anyone have try that system?

 

[Drizzt]

i think the hardest part is strumann system , dose anyone have try that system?

You mean synocta ? I am milling bone level as you can see above . Synocta is difficult .

 

[PinAn]

You mean synocta ? I am milling bone level as you can see above . Synocta is difficult .

yeah... i mill that with 0.5mm cutter and wasn't perfect

 

[Affinity]

pete can you do this with the everest?

 

[greeny]

synocta doesn't seem too difficult, it's just an 8 degree taper and a hex (with some tapering on the edges). Nothing internal so there's no need for such a small (.5mm) tool.

Wow greeny they look fantastic. I really want to get Hyperdent and now even more after seeing those. If you dont mind what was the cost of it. Got some really cool goodies stored in Dropbox if you want them then PM me your email You are going to really think Santa has come when you see them
All the best Pete
It's the least I can do for an other lab from Manchester Lol

I'll definitely have to get some of those files from you! Not sure about the cost, we're just doing some final tests on these parts before we approve them for our US D5 customers... so for me - it's free for now!

Here's the biggest change in the new version - importing interface geometries instead of defining or automatically detecting ridges and planes on the raw .stl data:

 

[YMS96]

Alpha Bio compatible


Biocom 3i compatible


Friadent Xive compatible


Straumann Bone Level compatible


Nobel Replace compatible

Also Astra is on the way , plus all companies that copy the companies above . All milled inhouse with Mayka Dental Cam and Yenadent D 40 .

How much was your mill with all the options you got to do those abutments?

 

[Drizzt]

Around 80.000 euros . Abutments was the cheap part !!!

 

[Drizzt]

synocta doesn't seem too difficult, it's just an 8 degree taper and a hex (with some tapering on the edges). Nothing internal so there's no need for such a small (.5mm) tool.

I am thinking of trying it with a 0.7 mm tool . Do you think it will work ?

 

[greeny]

Where are you thinking of using the tool? the hex surfaces? or the whole abutment base? i'd use something like a 1.5mm endmill with a .15 corner radius for the taper and hex and then finish the sharp corners with a 90 degree endmill (4 flutes can be nice for this too)

 

[Drizzt]

Yes I was thinking about the whole abutment base . I will try it and let you know , because right now , I don't have 1.5mm tool . Thanks !!

 

[greeny]

what shank size are you using? Datron AG might have what you need and they're relatively inexpensive compared to other dental tools (especially within Europe).

 

[Drizzt]

4 mm shank . PM me with pricelist please . Thank you .

 

[k2 Ceramic Studio]

pete can you do this with the everest?

Hyperdent have been round and shown me the software, they say the Everest can mill abutment interfaces, the best I can do is bridge abutments as this is not as complex, but really do want the Hypo software.

 

[PinAn]

this is the difficult part,that i said

 

[greeny]

kinda hard to see what's going on there... is that a flat surface?

 

[Labwa]

its a concave with a sharp point. this is the castable version.