user name
Well-Known Member
Full Member
- Messages
- 6,960
- Reaction score
- 1,633
Renfert has 3 bur options. 2 cross-cut, tapered and straight, and a tapered coarse cut...
They are kinda expensive; close to $100.
Is anyone using an alternative? Ive looked at a local tool supply, and similar burs run around 10 bucks, but the shank is just a tad thicker. If you remove the ring that slides over the chuck and snugs the bur in, you can drop a regular tool-store bur in, so just running a drill bit through the retention ring to open it up a bit would be easy. Before I do that, have any of you taken a different route? Found a better cutting, lower price bur?
They are kinda expensive; close to $100.
Is anyone using an alternative? Ive looked at a local tool supply, and similar burs run around 10 bucks, but the shank is just a tad thicker. If you remove the ring that slides over the chuck and snugs the bur in, you can drop a regular tool-store bur in, so just running a drill bit through the retention ring to open it up a bit would be easy. Before I do that, have any of you taken a different route? Found a better cutting, lower price bur?