Pink colored implant bar

[Beatrice]

Well it done, we can achieve probably any color your can imagine with top quality
Here a sample done for a customer, some will find it too purple ish, some will like it, some will find it too pink.
It a point of view and we will try to offer the best possible when you ask for.

For any question contact me here or by e-mail/phone,
The option will be available on our website beginning of next week.

www.pantheradental.com

 

[JohnWilson]

This closest to pink anodizing I have seen good job

 

[Beatrice]

Thanks you John,

We have worked hard to find the correct recipe to clean the titanium before processing of the anodizing.
Also the quality of the equipment used play a major part in the consistency of the color you achieve.
We are let's say proud of our work.

 

[j.abadsantos]

looks very nice...

 

[Affinity]

real real cool

 

[aidihra]

It looks great! Can you also make it in a white colour?

 

[cadfan]

Nice to see in the morning in the mirror in the bathroom hope their is some fog but good job better than in real color.

 

[Beatrice]

It looks great! Can you also make it in a white colour?

Unfortunately white cannot be acheive by this process.
But I can do a silicoating threatment over the bar to make it white here a sample of what it can be done :

 

[DarrenS]

Looks very nice! We have been achieving nice color as well.

 

[Beatrice]

EDIT : nevermind this post I solved the problem upthere


Sorry my other picture don't seem to work I don't understand

If you want to see it here the link :

img23.imageshack.us/img23/6820/gass.jpg

 

[aidihra]

Looks very nice! We have been achieving nice color as well.

I see your picture just fine.

 

[Beatrice]

Here another picture of the solution, some of you might prefer

 

[DarrenS]

We need to talk! Very nice.


Sent from my iPhone using Tapatalk - now Free

 

[JohnWilson]

Here another picture of the solution, some of you might prefer

The posts I assume are prefab correct? drilled/tapped? You can set them at the angle to the tooth that needs support in cad? These types of add ons I assume are milled on a lathe and mass produced? Are you using a thread locker and if so how can you anodize the the post unless they are done prior to assembly? Nice work as always Bernard

 

[zero_zero]

The posts I assume are prefab correct? drilled/tapped? You can set them at the angle to the tooth that needs support in cad? These types of add ons I assume are milled on a lathe and mass produced? Are you using a thread locker and if so how can you anodize the the post unless they are done prior to assembly? Nice work as always Bernard

I would bet that he won't spill the beans on this process...as far I can tell, you have guessed right...not sure about the treadlock method...it has to be health Canada (and FDA) approved... cannot be Loktite for sure

 

[Beatrice]

Thanks for the good comments, John, exactly the pin are milled before and screwed, the angle can be adjusted to be in middle of the theet buccal-lingual and mesial-distal
We do not any thread locker since some customer will want to unscrew them to cut them or make some minor adjustment than replace them. But we do recommend to use one such as Bredent attachment glue as an example or anything else of this kind, it work perfectly!

As always I am available for any question just call me

www.pantheradental.com

 

[rkm rdt]

It's a shame to cover such beautiful craftsmenship with a bunch of teeth!

 

[Beatrice]

It's a shame to cover such beautiful craftsmenship with a bunch of teeth!

Sir, you made my day, seriously !