• Welcome to Dental Lab Network
    1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

    Lisi Pellet selection

    Discussion in 'All Porcelain-Press' started by sndmn2, Jan 11, 2017.

    1. sndmn2

      sndmn2 Active Member Full Member

      Joined:
      Apr 2010
      Messages:
      330
      Likes Received:
      45
      I'm not totally familiar with all their shades. I have to match some veneers I did back in 2005. The shade is OM3. Would I want to use HT-BL3, MTBOO or MTBO.? I have no stump shade. I guess what I'm asking is which shade would be the safest option with what little info I have? thanks
       
    2. 2thm8kr
      Devilish

      2thm8kr Beanosavedmysociallife Full Member

      Joined:
      Dec 2009
      Messages:
      7,565
      Likes Received:
      1,871
      The safest option is to use the same material and shade you did last time. Value is everything if you want to sell it on the first try.
       
      • Agree Agree x 2
    3. zero_zero
      Drunk

      zero_zero Well-Known Member Full Member

      Joined:
      Mar 2013
      Messages:
      3,556
      Likes Received:
      960
      Just like 2th said, I'd use the same ingot you've used for those veneers...
       
    4. sndmn2

      sndmn2 Active Member Full Member

      Joined:
      Apr 2010
      Messages:
      330
      Likes Received:
      45
      That's the thing..I made those other veneers 11 years ago... I'm sure I made them on foil and probably used Duceram porc. One is a full crown #5, 6 is a venner and I need to match 7,8,9 that I did 11 years ago.
       
    5. sidesh0wb0b
      Pensive

      sidesh0wb0b Well-Known Member Donator Full Member

      Joined:
      May 2012
      Messages:
      2,703
      Likes Received:
      349
      good luck, thats a looooong time and materials change a lot.
      tricky situation, we have all been there!
       

    Share This Page