• Welcome to Dental Lab Network
    1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

    Exocad demo

    Discussion in 'Dental-CAD' started by tehnik, Dec 15, 2016.

    1. tehnik
      Inspired

      tehnik Member Full Member

      Joined:
      Sep 2014
      Messages:
      81
      Likes Received:
      6
      Hi

      I have this question about exocad demo dongle. Is the exocad that comes with the demo dongle otherwise full version? The only limit is the dongle? If I buy later full dongle does it work with the same installation or does it need new install?

      Regards.
       
    2. 2thm8kr
      Devilish

      2thm8kr Beanosavedmysociallife Full Member

      Joined:
      Dec 2009
      Messages:
      8,316
      Likes Received:
      2,113
      Location:
      Suburbs of Hades
      Exocad demo is full blown exocad without the ability to save stl. If you want to see what exo is about it is a cheap way to see the capability of the software. If you buy, then you will need an official CAD version.
       
      • Like Like x 2
    3. tehnik
      Inspired

      tehnik Member Full Member

      Joined:
      Sep 2014
      Messages:
      81
      Likes Received:
      6
      Ok, but does the save function come with full dongle? Or the save function comes with software?
       
    4. cadfan
      Amused

      cadfan Well-Known Member Full Member

      Joined:
      Jul 2013
      Messages:
      1,253
      Likes Received:
      185
      Location:
      Germany
      demo is demo no save function . exo needs additional dongle and installation you can run both parallel and test things on real cases you have done with "real exo"
      example crown done without virituell articulator you can check with the demo version load scene start articulator and see if its a good buy
       
      • Like Like x 1
      • Agree Agree x 1
    5. tehnik
      Inspired

      tehnik Member Full Member

      Joined:
      Sep 2014
      Messages:
      81
      Likes Received:
      6
      Ok, thanks guys!
       
    6. Papito

      Papito New Member

      Joined:
      Dec 2016
      Messages:
      3
      Likes Received:
      0
      Is anyone milling era attachment on exocad
       
    7. zero_zero
      Drunk

      zero_zero Well-Known Member Full Member

      Joined:
      Mar 2013
      Messages:
      3,989
      Likes Received:
      1,178
      Location:
      Canuckistan, eh!
      Not milling, but designing...yes...
       
    8. Papito

      Papito New Member

      Joined:
      Dec 2016
      Messages:
      3
      Likes Received:
      0
      I'd like to know how to get a digital design of a era attachment on exocad to mill in sintron material
       
    9. zero_zero
      Drunk

      zero_zero Well-Known Member Full Member

      Joined:
      Mar 2013
      Messages:
      3,989
      Likes Received:
      1,178
      Location:
      Canuckistan, eh!
      You'll need the STL of an ERA, then you'll prolly have to modify your strategies to properly cut the ring...
       
    10. Papito

      Papito New Member

      Joined:
      Dec 2016
      Messages:
      3
      Likes Received:
      0
      Thank you
       

    Share This Page