Balls deep into your Mouth (little balls) NSFW

[DMC]

 

[JohnWilson]

All cad or scan of a denture set up?

 

[DMC]

 

[leecoursey]

So you're going to do ZirkohnZahn Prettau bridge on this? I hear it works for anything....

 

[DMC]

 

[JohnWilson]

Wow am I sipposed to be excited about the alien head or the bad restoration being masterfully created?

Scan looks good, did you borrow someones 3shape scanner ?

 

[DMC]

You've never gotten head, like Alien-head!

(Skeet-skeet)

I'll ask to send ya the model and you can have at it!

 

[DMC]

 

[rshark]

I'd love to see how this one goes. keep the thread going and show us what you end up with. My thoughts would be to cover most of them up and do an over denture with moloplast B. Then as they fail, (and they will) just uncover a couple more and reline the denture again. I thought those implants were only ever designed to support interim bridges until the REAL implants are brought into play after integration as John said. I've done 2 cases using those implants, it was great I got paid twice in the same year for doing the same case. I'll keep an eye on this thread and see where it goes.popcorn

 

[DMC]

I just do what I'm told........

Wax-up situation super-imposed onto rough proposal of full contour.

 

[DMC]

LOVE EXOCAD!!!!

So far, it is ROCK SOLID! I've done some whacky sh1t to try and crash it...It won't.

Easy to open Multiple CAD windows and scan at same time.

More Monitors and super Graphics cards (plural) are coming....

I'm going semi-SuperComputer with Nvidia Tesla Cuda powered GPUs. (Hah Cooter powered)

It seems no limit to the amount of data you can stuff into One project.

I have Rocking new Graphics card, but it ain't enough.

I had over Eight meshs stacked up on screen at once with well over 6,000,000 triangles minimum per mesh!


I'll demo later.

This case is a mix of various CAD systems and scanners and software.

It is a challenge for me. I could never do it without the Italian Nobil scanner and ExoCAD.

http://www.nvidia.com/object/cuda_home_new.html

 

[disturbed]

I think I'm gunna be sick...

 

[DMC]

You better get to learning some CAD!

Throw down the brush buddy.

Last warning!

(I am just following orders on this case. What am I suppose to do?)

 

[DMC]

 

[Labwa]

that left central looks interesting.
Are you designing this for another lab?

 

[molarmaker]

If this isn't a case for a scanner in the lab I'm lost. No way in my mind could I get my thoughts on how to design this, the machines have us beat, if not for the design ,the draw. Hope final pictures come available. Is their any end of amazement you come with.

 

[DMC]

Looking from side of bridge at insertion path orientation, the bridge is almost 40mm tall and took Eleven hours to print yesterday/last night.

The fit is dead on perfect! (3D Systems Pro-Jet)

We made a custom fixture and block for this case. 18mm disk of Zirconia at 38 degree angle in a Lava mill.

Many many other tricks are used to get this case out the door. Sorry, but I can't take any more pics. Too many things I have done that I'd rather not share.

Thanks for watching!

Bye.

 

[AJEL]

Any chance we could at least see the insertion? Or the cae on the articulator U started with? amazing!

 

[JohnWilson]

Sorry, but I can't take any more pics. Too many things I have done that I'd rather not share.

Thanks for watching!

Bye.

LOL

 

[DMC]