Search results

  1. E

    ivoclar ep600combi head close immediately

    Is the furnace head opening normally or does it struggle? I remember having to change a gas charged piston the helps the head open/close, maybe worth checking.
  2. E

    Which scan body/Ti-bases to use

    Here ya go, hope this helps: Dess compatible SRA components https://www.dess-usa.com/on-top-of-sra-components/
  3. E

    Analog fit in printed model exocad

    Make sure you are using the newest Imagine library for model analogs! About a year or two ago they changed sizing specifically for the Nobel analogs.
  4. E

    ZIRCONIA FURNACE

    My advice is don't go cheap on a sintering oven. You'll waste a lot of time diagnosing problems, ask me how I know. The worst thing is coming in in the morning and realizing an entire day's worth of work has to be redone. I would suggest a lightly used Ivoclar S1 to save some money or an S2 with...
  5. E

    Printing issues

    We got really tired of the labor and mess of ultrasonic cleaning all of our 3d models and air blasting alcohol/resin all over everything, No matter how careful we were, all of the cabinets and surfaces end up sticky and dirty . Enter the Anycubic Wash & Cure Max, this thing is pretty sweet...
  6. E

    3m lava scan st

    It's a good scanner but very slow compared to to the scanners that are out today. From what I understand, it only works with older versions of exocad. Contact Scott @ Prime Dental / Dominion Milling in VA, he knows all about these scanners and can help you out (Sorry, can't post his # here, just...
  7. E

    Shipmon base

    Partial instructions are included in the photos of this ebay listing, hope it helps https://www.ebay.com/itm/262586517285
  8. E

    DIO IMPLANTS

    No? If that information is wrong, please elaborate as I don't want to misinform anyone. Spoke separately with support staff from both companies and they both told me the same thing.
  9. E

    DIO IMPLANTS

    Reviving this old post, if anyone has to deal with this company, the parts are near unobtanium. However, I learned from DESS and Preat that Dio internal Hex RP should be compatible with Hiossen RP. Hope this helps someone frantically googling this in the future!
  10. E

    Heating elements replacement for Ivoclar S2

    This is the way. After the cluster-f of having our one oven go down on a Friday afternoon and having no extra elements on hand is why we immediately got an S2 as a backup. It doesn't get used nearly as much as our S1 but it's already saved us a couple times.
  11. E

    Heating elements replacement for Ivoclar S2

    I knocked it out in one afternoon, just dedicate some uninterrupted time to do it. Best piece of advice is to take lots of pictures during disassembly and make sure you have a few small wrenches and pliers to get to hard to reach areas. They told me the same thing about the propane torch, it...
  12. E

    IDS CAD changs liquid

    And I juuuuust ran out of IDS White Plus internal block. Anyone know of an alternative?
  13. E

    Phrozen Sonic Mini 4K Help

    This is correct! The new version of Chitubox requires a firmware update to your Phrozen printers due to a change in the print file format. All you need to do is download the new firmware from the Phrozen website, put the files on a blank USB, and restart your printer.
  14. E

    Primescan

    I'm not sure if it's still the case but a couple years ago we were able to get a free license from one of our Drs with a Prime scan. Part of the Dr's scanner purchase package was 1 or 2 Sirona Case Connect licenses that they could give to a lab that they work with, we just had to buy a USB key...
  15. E

    For Sale 3d software

    Hi Phil, sent you a dm
  16. E

    Squiggly cut out line

    I'm assuming you're referring to exocad and editing a mesh? If that's not correct, then disregard this info. Rather than closing your selection in the edit mesh step, leave it highlighted and hit "delete" on your keyboard, it will cut the mesh straight rather than follow the stl triangles.
  17. E

    What the Frick!?! Minimum Thickness Oddity

    Hi Riley! This option comes up for us when doing emax crowns, min thickness is set to 0.6mm everywhere, and an additional 0.5mm on the occlusal surface. If you want just 0.6 everywhere, just slide the occlusal increment slider to 0. If the extra thickness is being applied somewhere other than...
  18. E

    Straumann blx implant model

    We've used DESS components for our BLX implants, give them a call
  19. E

    Roland DWX-52D Puck Clamping Improvements?

    A few years ago, Marc Dixon (someone much smarter than me) posted a design and necessary files for a DWX-51 style C-Clamp for the 52. You have to get the parts machined via sendcutsend, protolabs, or some other fabricator, but it might be a solution for you...
  20. E

    Looking for small - medium labs that are interested in 3d printing services.

    Seems like quite a few people have, including myself before we got our own 3d printers. There was a whole thread about it: Argen Printing Pains
Top Bottom