Search results

  1. Techy

    Digital Department setup/workflow?

    Very Broad question, yet an important one. We are in the process of converting some of our "traditional" labs to "Digital" besides the hurdles and complications of doing this, I wanted to pose the question (if your comfortable sharing) how your labs are coping with the transition. The most...
  2. Techy

    Sintering Furnace (Battery back-up&UPS)

    Anybody using a Battery Back-up on their furnaces 110v (Sintras) When we have thunderstorms I get anxiety about loosing 100s of units each night to Power outage! We often will get a small surge in power and only need a few minutes of battery assistance.,,,, Anybody in a similar spot Thanks...
  3. Techy

    Zolid FX / Zolid HT +

    We can not seem to make this material look good. We have tried numerous Crowns of both materials. We purchased the complete stains kits for each specific material (coloring liquids, Enhancers, Inhibitors) Followed stain dipping techniques, adjusted after feedback from Amman. Sintering at...
  4. Techy

    Roland Repairs Florida?

    Anybody know of Roland Repair company/person in Florida? (Avon Park) Having a "Y" axis error and in need of support Originally bought through a re seller in Canada, who does not sell equipment in the U.S (I am sure most people know which company) If anybody has constructive ideas/advice...
  5. Techy

    DME settings for 3shape

    I am currently about to start cutting emax/Titnium/CRCO I am wondering if anybody has had success or advice with a custom made DME setting for 3shape design on the following mills: Cam is WORK NC Roland (we have this one pretty dialed in) Imes 550i (seeing loose fits with metal) Sirona MxCL...
  6. Techy

    Imes Icore 550i support

    We picked up a low hour imes 550i I am looking for somebody to help give us the "basic training" tool change, calibration, etc I am having no luck with local distributor....(They are saying imes wants to send tech for 6500$....) We just need a teamveiwer session for an hour,,,,, Any suggestions!
  7. Techy

    What Hours are you seeing from your brand of Roland tools?

    Maybe we could compare tool life ( I know there are a few factors here. toolpaths, thickness, etc ) thought this would be interesting Tool Brand: Primotec Diamond Zirconia: Argen Asthetic Hours Approx: 80-90
  8. Techy

    Health Canada Soft CrCo?

    Can anybody recommend a soft CrCo (dry millable) with health canada? I know Amman Girbach has the D-pucks,, Any others thanks in advance!
  9. Techy

    Sum-3D for imes icore 550i

    Anybody using this combo? We just picked up a imes 550i and we are currently running sum-3d with good results on the fleet of Rolands. I know this is a completely different animal and was curious about this pairing? We are also looking into Work NC Please advise if you have experience. Any...
  10. Techy

    How is your digital/Milling dept Setup?

    I am looking at moving and wanted to get ideas of how to setup more efficiently. We have approx 5 employees and about 7 milling machines and a few printers. I am really trying to establish an open concept environment with mills/printers on side and "design/scan stations" on the other. What is...
  11. Techy

    Contamination in Mihm Vogt

    Latley, I have observed greenish/yellowing on my crowns on the top tray... I tried to fix this with a "purge" did not help I was told to run 1600 for 8hrsDontknow replacement elements are 900$ each! Whats my next step? Anyone using this oven and have a good cycle? I am using my other...
  12. Techy

    3shape (Gernate Cam output F7) missing?

    I had a customer call saying that under advanced settings in 3shape they no longer have a "Generate Cam output F7) I changed his cement setting a day prior (that is literally all I changed) Now there is no export feature on his D900?! Any suggestions? Could this mean his scanner is...
  13. Techy

    Sintra Question!!

    Just picked one up today (other Oven is "Sick") Anyways just programed the oven,,,started it,,,now its saying displaying heat......no temp read out yet I lowered the tray, and it did not feel that warn,,,,,does it take a while until it acutally starts elements? Please advise Would like...
  14. Techy

    Labeling Zirconia Frameworks (high volume)

    Just wondering how large labs/milling centers are labeling their frameworks? Each morning we are sorting through at least 80+ units What type of labeling/organizing are you guys using? I am going to start engraving internally on Crowns..... Please advise Adam
  15. Techy

    Mihn Vogt Ht/Speed issue

    It has happened twice now... I come in the morning the the furnace is still holding at the high temp!? I have to cancel the program, and wait to let it drop temp,,,, Very frustrating while trying to get work out. Today it happened again,,,Furnace was at 1100 degrees and holding,,,,,, Any...
  16. Techy

    3shape update

    Very pleased with the 2014 update, seems to just run "smoother" Auto crown button 10X better!!! That being said, I was looking forward to the new libraires which 3shape mentioned in Chicago, does anybody know what the deal is with these? Do they have to be purchased? Adam
  17. Techy

    Sirona MC XL - Door replacment labour $300!

    Door broke on our never used Sirona Mill Door covered under warranty,,,,,but they want to charge 300$ to install it !!!! hahahaha Where can I just buy the door? I can not in any way pay this,,,,,,its just principle. Also, where can I apply to be a Sirona Tech? Adam
  18. Techy

    Nabertherm Ht/Ct 0116 Sintering Furnace

    Have a Nabertherm Sintering furnace for sale. Can hold two stack able trays ( 50 units) no problem We have a larger furnace now,,,,so just does not get used. Located Toronto Area Pm with offers/questions
  19. Techy

    For Sale: Zircar Hotspot 110

    Approx 2 years old General Maintenance done regularly Changes thermocouple and elements twice Currently in good running condition (insulation looks good) Used as a Back up sintering oven Purchased larger capacity oven (Mign Vogt) WE have no need for fours ovens!!! Please...
  20. Techy

    Lab Setup/layout

    I am in the process of rearranging the way we work. I am looking for suggestions (pics would be great) of how people are setting up their design centers/Sintering ovens/Staining/mills/printers etc.... Dedicated Room? Bench vs desk? Size of room? Number of people? Basically what is...
Top Bottom