Search results

  1. PRO ARTS DL

    Removable Ti Framework Labs

    Hi all Does anyone have a recommendation on a lab that can make a Titanium Partial Framework (Removables) First time we ever get a case like this and I'd like to check our options. Thanks!
  2. PRO ARTS DL

    3D PRINTED NG AND WARRANTY

    Hi all I was wondering what type of warranty are you offering on your 3D Printed nightguards? We have been printing them for a little over 1 year using Keysplint SOFT and ArgenFlex (Very similar materials/ maybe same manufacturer) However we've been noticing more failures closer to the 1 year...
  3. PRO ARTS DL

    Soft Liner/Reline Material

    I know this question has been asked in the past but I'd like to see if there's any new recommendations. We have used in the past Molloplast B and now we use Nobilium Impak-PF Now that Nobilium closed what does everyone else recommend?
  4. PRO ARTS DL

    SGS P5D Compatibility (Conical Platform)

    Hi All Is anyone out there fabricating custom abutments for the implant SGS P5D? This one is part of their conical platform line so as far as I know it is propietary... They only have stock abutments and a small selection of TiBases which don't always work on all cases. We'd prefer to make...
  5. PRO ARTS DL

    Used 99% Alcohol

    I haven't really seen this discussed before What are you guys doing to the used isopropyl alcohol that was used to clean resin from 3D printing? I have read it can be quite harmful if disposed down the drain or in the trash bin.
  6. PRO ARTS DL

    Keysplint Soft and ASIGA Max and Exocad

    Hi all, Does anyone have experience printing Keysplint Soft nightguards on the ASIGA MAX? We are experiencing some issues with retention. A good amount of them just have no retention at all or very little. Our current design settings (exocad) for the bottom part are: Offset: 0.01 Angle 1...
  7. PRO ARTS DL

    Implant ID

    Hi everyone, I wanted to see if anyone could help identify this implant. I was told they might have been placed about 20 years ago but we are very unsure about this. I tried to check the what implant is that site but nothing seemed quite the same. Thanks!
  8. PRO ARTS DL

    Radiographic Guides

    Is everyone still using Scanocryl or Biocryl X for them? I see Polident also has radiopaque PMMA. Has anyone used it? I was thinking it could be easier to make an "essix" using the radiopaque PMMA pontics? Is Scanocryl still being sold?
  9. PRO ARTS DL

    Intraoral Glaze

    What would you recommend to glaze porcelain veneers intraorally? I have a doctor asking what can they use to glaze some veneers that look "opaque" due to adjustments on the facial of the veneers. They're not our veneers so I'm not really sure what they look like and what material they are...
  10. PRO ARTS DL

    Scanning Stock Abutment

    How is everyone going about scanning something like this? I haven't tried yet but I have a feeling my scanner won't see it all once I modify the stock abutment. Maybe I should have sectioned it? Wish I could do a custom abutment but doctor wants me to use the stock abutment Argh.
  11. PRO ARTS DL

    Die Stone

    I know I know this has been talked through before but I wanted to see if there's newer opinions. What is everyone currently using? We currently use Talladium's Tuff Rock in white. I personally like it but I've been wondering if it may be causing some problems. This one doctor always complains...
  12. PRO ARTS DL

    Hader Bar Milling Center

    What milling center would you recommend to mill a hader bar? o_O If possible one where I could send a scan? Thanks!
  13. PRO ARTS DL

    Snowrock Rockwax

    Has anyone tried this product before? http://www.snowrockusa.com/rockwax/ We saw this product or something similar during the LMT convention and were wondering if anyone has any experience with this specific one or a similar one? We are currently using Megatray Light Cure Material but we were...
  14. PRO ARTS DL

    Coloring Nexxzr+

    Hi everyone Just wondering what liquids are others using for Nexxzr+ I've been doing it with Ceramill liquids and they seem to work alright but I'm looking at other options. Thanks!
  15. PRO ARTS DL

    Custom Printed Boxes

    Where is everyone getting their custom printed boxes? :) So far we've been just printing labels and sticking them on every box but we'd like to move into a simple custom printed one. I've been looking around but the prices seems to be all over the place. Thanks and have a good weekend Beer
  16. PRO ARTS DL

    Fluorescent Denture Teeth

    Just got a case for a partial denture where patient specifically requests teeth that will glow under a UV Light. First time someone requests this for a removable. Any recommendations? Thanks
  17. PRO ARTS DL

    Implant Case - Suggestions?

    So I got this case with 2 implants placed like this... It seems Dr had already sent it to another lab and the result wasn't satisfactory. Food trap on the lingual, patient not pleased with esthetics (patient wanted it to look like 2 different crowns),and I believe it kept on falling off...
  18. PRO ARTS DL

    Looking: Whip Mix ProPress 100

    Hi, I'm looking for a used Whip Mix ProPress 100. Please contact me if anyone is selling one or know someone that is selling a used one. Thanks
Top Bottom