Is there a way in 3Shape to take a study model ,like from PTC, and create a printed model of prepped teeth for product examples? Layered single central, 3 unit layered bridge etc...
Roland FAQ
https://www.rolanddga.com/support/products/dental-cad-cam/dwx-52d-5-axis-dental-mill/article?pm=DWX-52D&articleId=what-kind-of-compressor-should-i-use-enduser
Wondering what suggested resources were most useful for the written specialty and practical exam for Implants. I've ordered all of the recommended reading materials, If anyone has some pointers as were to focus my efforts in preparing for both of the exams.
Also look into getting some Nacera powder, sprinkle it on the sintering beads and run some zirconia with it. Will help pull contaminants off the heating elements. If it persists you might have one heating element going bad that’s causing a cold spot
Appreciate your perspective, we do a lot of crowns with axial grooves and very short clinical crowns. Having a discussion with the doctor on expectations with those preps once and saving it to the doctor preferences prevents a lot of disappointment and remakes.
You may considering building a little cure box for recycling your resin. Mylar liner cabinet with UV LED lights at the correct wavelength to cure the dissolved resin. Let it sit for the weekend and decent off the clear alcohol. Use it as a prewash to extend the life of your wash unit alcohol.
I would venture a guess that eventually this, if it hasn’t already, would be incorporated into 3Shape and Exocad were Artex,Denar, Panadent, SAM articulators would all be applicable with an open platform photogrammetry scanner would cover all the major articulators.
Seems like the business model could be a win. They potentially carry a lower overhead per “employee” with most of the cases being digital and remote design. They lock in practices by providing the scanner and a minimum recurring balance. Scan and send. What am I missing?
https://www.amanngirrbach.us/products/sintering/ceramill-therm-drs/
So is this going to be limited to only Ceramill DRS zirconia or is there a feeling we will see this in open platform sintering ovens?
With 20 min fast firing I’m guessing the end user is in office? Anyone have a use case for...
Update. Need help identifying the screw,
The gold colored screw on the left has a diameter of 1.30m +/- .05mm and for comparison the screw on the right is a Nobel Multi unit screw.
Screw head is either an .050 or 048 Hex. Any Ideas?
Any ideas?