Restorations Du Jour

J

James Kivimaki

Member
Full Member
Messages
57
Reaction score
13
This super work actittle

One question: A verification jig !!
Verification of what?
is it to to try in the mouth , to make sure that the impression is right?


A verification jig is made in order to verify that the master model is correct. It would be terrible if you wasted a whole puck and the time designing a case like this and one of the implants was slightly tilted in the impression. Its just a precaution.
 
J

James Kivimaki

Member
Full Member
Messages
57
Reaction score
13
what material did you use for the pink?
 
actittle

actittle

Señor Member
Full Member
Messages
362
Reaction score
74
This super work actittle

One question: A verification jig !!
Verification of what?
is it to to try in the mouth , to make sure that the impression is right?

Yes, it is to verify that the model is an accurate representation of the patient's mouth.
 
rkm rdt

rkm rdt

Well-Known Member
Full Member
Messages
21,409
Reaction score
3,288
Emax BL4

images
 
N

Nasser Kaouk

New Member
Messages
1
Reaction score
0
Hi rkm rdt
I know my question to you here is out of the topic, but I did not know a better way to ask you a question.
My question is: Where is the best place to buy furnaces such as the Vita Vacumat 40, Phoenix, or a Jeneric/Pentron used and preferably not in working order. Since you are an active member of this forum I thought to ask you.
Thanks in advance
 
CoolHandLuke

CoolHandLuke

Idiot
Full Member
Messages
10,078
Solutions
1
Reaction score
1,411
u want to buy broken furnaces...

try contacting an equipment retailer/repair depot such as Dentsply
 
rkm rdt

rkm rdt

Well-Known Member
Full Member
Messages
21,409
Reaction score
3,288
Hi rkm rdt
I know my question to you here is out of the topic, but I did not know a better way to ask you a question.
My question is: Where is the best place to buy furnaces such as the Vita Vacumat 40, Phoenix, or a Jeneric/Pentron used and preferably not in working order. Since you are an active member of this forum I thought to ask you.
Thanks in advance

First of all,I just want to be clear that the picture I just posted was not a " selfie" mmmkay?

Have you checked out EBay?
I'm sure someone on here will help you.
 
Adi

Adi

Active Member
Full Member
Messages
355
Reaction score
40
Only looking at the picture hearts
Nice job indeed
 
CoolHandLuke

CoolHandLuke

Idiot
Full Member
Messages
10,078
Solutions
1
Reaction score
1,411
just a single anterior i did today that i like how it turned out.





 
AltreX

AltreX

Member
Full Member
Messages
154
Reaction score
8
Nice presentation. Well done with that bearded moonshiner teeth. Nicer dicer ;)
 
sndmn2

sndmn2

Well-Known Member
Full Member
Messages
1,025
Reaction score
166
CHL........re: your crown... Is that meant to be milled in wax for pressing ? blue block or a full zirk crown ? thanks
 
JohnWilson

JohnWilson

Well-Known Member
Full Member
Messages
5,487
Reaction score
1,575
CHL........re: your crown... Is that meant to be milled in wax for pressing ? blue block or a full zirk crown ? thanks


Why does this matter? Are you just curious?
 

Similar threads

CatamountRob
Replies
6
Views
778
bigj1972
bigj1972
I
Replies
17
Views
287
Flipperlady
Flipperlady
J
Replies
5
Views
880
jesusdesinger10
J
J
Replies
1
Views
328
Amr Zakaria
A
Top Bottom