Emax/Zirconia hybrid ingot selection

[actittle]

I'm doing a full-arch case with a zirconia substructure with emax crowns that will be cemented on after the framework is seated and screwed in.

The goal shade is A1, I'd like to press the crowns full contour with a little staining here and there for characterization. Would the impulse V1 ingots be a good choice for this case? I've never used them before, just HT and LT so far.

Thanks in advance for the advice!

 

[user name]

The V1 would be fine, but Id use the HT A1.

 

[zero_zero]

One more vote for the HT ingot...

 

[rich green]

if you're doing a whole arch either one will work but I think these guys are right A1HT prob best. your zirconina substructure will be A1 right?

 

[actittle]

your zirconina substructure will be A1 right?

Yes

 

[PDC]

Ht would be "OK" but those Value shades are really nice. I don't think you will be disappointed. I would use the Value pellet especially if you don't have much room on the facial in the incisal 1/3.

 

[Drizzt]

Value ingot for me . HT , especially when it is full contour , tends to has low value issues , and have a ''greyish'' effect .