Sevan P
Well-Known Member
Full Member
- Messages
- 3,413
- Reaction score
- 641
So is anyone else having this many issues with your VHF mill? EZ mill, Master mill, Wieland Mini, Bruxir mill etc............? I have already run through both the touch off plates due to broken burs and re-milling the touch off plate, a 170.00 sierra 1mm tool just caused my latest re-mill on the third touch off plate, and I am about to go to the fourth one I haven't yet ordered!
After every mill I dust off the touch off area clearing it from and left over ZR, PMMA or Wax, chuck maintenance once a week. And yet some how this P.O.S. mill finds a way to divit the touch off plate causing me to re-mill it. In a weeks period I already have re-mill the touch off plate twice and re-calibrated the mill.
CadBlu couldn't even answer my question as to what the Node Diameter in the settings panel adjusted. They can't even figure out why and only in PMMA does the bur dig into the connects and run threw the margin where the connectors are.
It seems like I have to fully clean this mill ever time I cut something in it. I clean off the touch off point for sure but give me a break I had a DWX-50 and an iMes 340 running non stop all day long wax, pmma and ZR and not one single issue. No but his little crap box need more babying then a new born baby. FML!!!
Just curious to see if any one else hates this mill!!!
phew....................
Sevan
After every mill I dust off the touch off area clearing it from and left over ZR, PMMA or Wax, chuck maintenance once a week. And yet some how this P.O.S. mill finds a way to divit the touch off plate causing me to re-mill it. In a weeks period I already have re-mill the touch off plate twice and re-calibrated the mill.
CadBlu couldn't even answer my question as to what the Node Diameter in the settings panel adjusted. They can't even figure out why and only in PMMA does the bur dig into the connects and run threw the margin where the connectors are.
It seems like I have to fully clean this mill ever time I cut something in it. I clean off the touch off point for sure but give me a break I had a DWX-50 and an iMes 340 running non stop all day long wax, pmma and ZR and not one single issue. No but his little crap box need more babying then a new born baby. FML!!!
Just curious to see if any one else hates this mill!!!
phew....................
Sevan
Last edited: