Quote:
Originally Posted by dntek
This is a common problem, in general you need to glaze it twice the first time with stain the second time with no stain plus, either you increase the holding time or raise the final temperature but in most cases you end up with a hand polishing.
|
Your right it is a common problem, but it is a problem that can resolved. It personally happened to me when I first started to learn about e.max. I re-read the instructions for use on e.max Press on the glaze section and it was in black & white to PRE-POLISH with a suitable pre-polisher in a handpiece before glazing (smoothing the lithium discilicate surface). It took me a couple to really get good at it, but then it was perfect. Your correct with raising the high temps also. Glaze application is key. Mix the glaze really well and apply in a decent layer (I learned not to skimp out).